Just-better D10053 Instrukcja Użytkownika Pobierz pdf

Printed in USA

Part No. 10053-308

Evacuation, complete with pressure drop test using vacuum

gauge can be performed as well as charging system. Manifold

will hold vacuum of 25 microns or better without leaking.

D10053 Economy

Deep Vacuum Manifold

US. Pat. #3615109

EVACUATION:

1. Close Valves A and B . Valve A isolates Port #2

from system. Valve B isolates system from pump.

2. Install directly onto intake of your pump via the 3/8”

flare swivel coupler #1. Note: Do not wrench coupler.

Finger tightening will seal this connection for deep

vacuum.

3. If using vacuum gauge install to Port #2 using

O-ring coupler. If vacuum gauge is not used, cap

port.

4. Using deep vacuum flexible metal hoses with O-ring

couplers make connections at Ports #3 and #4 and

to the suction and discharge service valves on the

unit to be evacuated. This allows you to evacuate

from the high and low side of the system. Note: Unit

should be purged of refrigerant prior to connection.

5. Open suction and discharge service valves and

manifold Valve B . Turn on pump and open Valve A if

using micron gauge. Evacuate to manufacturer’s

recommendations and close Valve B . This isolates

the pump from the system to perform pressure drop

test using micron gauge.

TO CHARGE SYSTEM:

1. Close Valve B . This will be closed after pressure

drop test if using vacuum gauge. Remove gauge

connection.

2. Connect refrigerant line to Port #2 . Connection at

port should be loose. Open refrigerant supply. When

air is purged, finger tighten connection at Port #2

and open Valve A to charge system.

Technical service: 800-323-0811

E-Mail: [email protected]

Web Site: www.jbind.com

D10053 Economy 1
Deep Vacuum Manifold 1

Podsumowanie treści

Strona 1 - Deep Vacuum Manifold

Komentarze do niniejszej Instrukcji

Brak uwag

Just-better D10053 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Czujniki Just-better D10053. Just Better D10053 User Manual [en] Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Czujniki Just-better D10053